亚洲导航

一 概述

The PN7136 is a high voltage, high speed power MOSFET and IGBT drivers with a three independent high and low side eferenced output channels for 3-phase applications. The floating channels can be used to drive N-channel power MOSFETs or IGBTs in the high side configuration which operates up to 600V. Logic inputs are compatible with CMOS or LSTTL outputs, down to 3.3V logic. A current trip function which terminates all six outputs can be derived from an external current sense resistor. An enable function is available to terminate all six outputs simultaneously. An open-drain FAULT signal is provided to indicate that an over-current or under-voltage shutdown has occurred. Over-current fault conditions are cleared automatically after a delay programmed externally via an RC network connected to the RCIN input. The output drivers feature a high pulse current buffer stage designed for minimum driver cross-conduction. Propagation delays are matched to simplify use in high frequency applications.

二 特性

* Fully operational to +600V

* 3.3V logic compatible

* dV/dt Immunity ±50V/nsec

* Floating channel designed for bootstrap operation

* Gate drive supply range from 10V to 20V

* UVLO for all channels

* Cross-conduction prevention logic

* Over-current shutdown turns off all six drivers

* Externally programmable delay for automatic fault clear

* Independent 3 half-bridge drivers

* -5V negative Vs ability

* Matched propagation delay for all channels

三 应用

* Motor Control

* Air Conditioners/ Washing Machines

* General Purpose Inverters

* Micro/Mini Inverter Drives

四 封装

五 典型应用